Jeep Wrangler Tie Downs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach to holes in back. Provides anchor points for rope or bungee cords.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 19
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 5/26
I recently upgraded from my 2015 Wrangler (white pictures) to a 2022 Wrangler (red pictures). The new one didn't have the same holes for the bolts. There are 3 threaded holes that take M8x 25 1.25 pitch bolts (I think. It could be 1.0 pitch. I can't remember.) I also had to get washers (see pictures) because the holes in the tie downs were too big in the old tie downs.
To make things easier, I made new versions with "--small hole" at the end of the file name for these smaller screws.
I also made a new length with "medium" in the file name. It is 50mm long. The long one is a little over 100mm long.
*****Print with TPU or flexible filament*****
Two size tie down anchor points. I attached them with ¾" bolts and Nylock nuts (with the nylon ring in one end of the nut). I attached the straps of the cargo net (as seen in the pictures), but I also use them for rope and bungee cords.