Ender 3 NG v1.2 Dragon ACE toolhead mount with fiberglass shim reinforcement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternate toolhead mount for the Dragon ACE that is stronger and tolerates high temperatures better using included parts
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an improved version of the Dragon ACE toolhead mount for the Ender 3 NG v1.2, originally called toolhead_hotend_dragon_ace_HF.stl. Below, the original is on the left, and this improved model is on the right.

With the original toolhead mount, the mounting screws are placed directly into countersunk holes on the top of the mount. Ultimately, these holes take all of the physical stress from the force of the extruder, and the screws can get hot when printing at high temperatures, especially in a heated chamber.
This leads to the toolhead deforming, which makes the toolhead loose. Unfortunately, when the toolhead becomes loose, the printing action will rock the toolhead to further damage the mount. If the toolhead happens to be tweaked enough to “catch” a part or the bed, the toolhead can be torn from the mounts catastrophically, like in the image below.

The Dragon ACE includes a 3 mm spacer that is not mentioned in the Ender 3 NG v1.2 build guide, and is not intended to be used with the Ender 3 NG v1.2.

This improved toolhead design consumes this spacer as a strong, high-temperature washer between the mounting screws and the toolhead itself. With this design, the screws can safely be at a temperature that would normally melt the original toolhead mount. Additionally, since the countersunk holes are removed in this design, the physical stress of the screw mounts are spread across the 21 mm fiberglass spacer, which is significantly stronger.

This improved toolhead mount appears no different than the original when it is installed on the Ender 3 NG v1.2, as seen below.
