GOT7 Bird Magnet, Extruded Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of my previous GOT7 bird magnet, but with extruded details to make painting easier
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this bird magnet with a GOT7 logo as a freebie to hand out during GOT7 concerts. There is a pocket in the back for pressing in a 6x2mm magnet with minimal force (though I've attached two variations of the green body, one with a small press fit hole and another with a clearance hole for gluing the magnet in).
There are two bird designs: a single color bird and a two color bird where I separated out the belly puck.
Print settings:
- For reference, I printed using matte green and white PLA on an Ender 3.
- For the body files (either the single color bird file or the green body files), print them with the design face up on the build plate. The white belly doesn't need supports, but the green one does since it has the overhang.
The magnets are quite cute even without extra effort, but here are extra steps I did:
- outlined the bird with a black sharpie
- used a red sharpie for the cheeks
- used a yellow paint pen for the beak