Ender 3 NG v1.2 two-screw Y endstop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3 NG v1.2 Y endstop that uses two mounting screws
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Want a two-screw endstop that holds the microswitch in a position that accommodates tools? Use this model instead!
When homing, the Y gantry hits the Y endstop microswitch. This endstop has a tendency to come loose and twist, especially in a heated chamber. When this happens, the Y will calibrate at a further distance than intended. Probes typically live on the back of the toolhead, and this added distance can make the probe collide with the Z rod mount and break the probe.
This improved design adds another mount screw to the Y endstop mount. This solves the twisting problem, and gives the Y endstop a little more grip on the aluminum extrusion.