1 / 5
Ghostbusters RTV
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Remote Trap Vehicle from Ghostbusters Afterlife and Ghostbusters Frozen empire
Model is based around a cut down version of a 1/10 RC car
For shock absorber extension I used a 10x10 steel bar (aluminium also works)
Recommended to print most of the parts as flat as you can. Most of them requires supports.
Rear and front sections must be glued to central section.
Front unit uses two SG90 micro servos.
Doors have modeled holes for servos's main shaft
Rest of the parts are either original Ghost trap or RC car parts.
Rear pate uses 5x3 magnets.
Rear box has a 32mm cutout for P32 plug.