Coffee Funnel + Coffee Distributor - 58mm - E61
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small funnel to prevent coffee from overflowing during grinding. Can also be used as a distributor.
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 306
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
For 58mm portafilters (E61).
Can be used for both 2-cup and single-cup portafilters.
After grinding, tap lightly and turn the funnel. Turning counter-clockwise moves the powder more towards the center; turning clockwise moves it more towards the edge.
Then tamper it.
I printed the model with ASA because I smooth parts for food contact to remove the porous surface structure. But you can print it with any material; I'm just showing one possibility here.
Soak the paper towels with 20ml of acetone and let the model sit in it with the lid closed for 60 minutes.:
Let it dry for 2-3 hours after smoothing:
Print settings:
0,15mm detail, ASA
Infill 100%