Coffee Funnel + Coffee Distributor - 58mm - E61
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small funnel to prevent coffee from overflowing during grinding. Can also be used as a distributor.
- Rating
- 4 / 5
- Likes
- 5
- Downloads
- 52
- Makes
- 1
- Views
- 306
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
For 58mm portafilters (E61).
Can be used for both 2-cup and single-cup portafilters.
After grinding, tap lightly and turn the funnel. Turning counter-clockwise moves the powder more towards the center; turning clockwise moves it more towards the edge.
Then tamper it.
I printed the model with ASA because I smooth parts for food contact to remove the porous surface structure. But you can print it with any material; I'm just showing one possibility here.
Soak the paper towels with 20ml of acetone and let the model sit in it with the lid closed for 60 minutes.:
Let it dry for 2-3 hours after smoothing:
Print settings:
0,15mm detail, ASA
Infill 100%