Counting matching models…
V2 version adds possibility to mount two additional PowerCon outputs instead of third SchuKo-socket with adapter plate. *********************************************************************************************** Was in need of a…
Print approx. €13.60–€16.62 excl. taxPreliminary estimate for PETGSource material: PET
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
A moka pot distributor for 3 cups. It costs US$12 on amazon, so let's save the money.
Do you like this design and want to give a Tip for it? Do it here This is a Wall Mount for the GrindDozer Espresso Funnel / Distributor, that you can find on thingiverse too . I would advise you to use (opt. food-save) PETG, since it's…
This is a small decorative statue that allows you to pour 6 shots at once. it is a kit and does not require any glue. The assembly is very simple, thus, no video. The models are put into folders based on their colours.
The cooling distributor provides nozzles around the spindle nose without coliding with the umbrella during toolchange. Will fit all 5.2" (132mm) spindles. I have used nozzles with M8x1,25 threads, and they have been purchased here:…
Instructions You will need to print 8 copies of the part in order to make one complete distributor. I recommend gluing them into 2 groups of 4 and then gluing the 2 semi-circles together. Print settings Layer Height: 0.2mm Support: None…
This is a remix of Sillybutts SillyShell. I remixed the shell to ensure that no more air escaped through the middle of the four darts. I designed a small air distributor that sits in the back of the shell. It funnels the air directly into…
A simple distributor canopy for mounting lamps at different spots than the cable outlet.
Lamp connection Cover Hexagon with central screw connection, so old plugs can continue to be used directly. The cover is available with one and two cable glands as well as 100x40mm and 70x30mm. Lampen Anschluss Cover Hexagon mit zentraler…
A rather simple coffee needle distributor (WDT) using regular sewing needles, and with two different stands. It supports up to 7 needles. I wanted something with sturdier needles compared to the regular ones that use acupuncture needles.…
For "cigarette lighter"-style sockets. Print as shown - no support needed.
This is a voltage distributor for my shack. Too many banana plugs so I needed to find a solution. I use it for 13,8V with very low total current. Input power can be via one of the plugs or you can drill a hole and connect solder the wires…
Thanks to Darren Gurney for providing the inital cap model. I made it printable on an FDM printer and added various parts. This is a fiddley job. Use fast glue to add the parts together and to add the black mounts to the engine block. The…
This is a two part model to hang a 54mmm (53.3) Normcore gravity distributor tool to a Multiboard panel. The model is designed to work with the rubber stand included with the tool. The Snap Mount attachment model is a separate part to…
GERMAN Kfz-Stromverteiler für Wago-Klemmen. Auf jeden Fall ist die Verwendung eines Stromabgreifers mit Sicherung NOTWENDIG! https://ebay.us/lLddsu(Werbung ) Die Leitungen müssen mit Kabelbindern am Zugschutz des Halters befestigt werden.…
V2 version adds possibility to mount two additional PowerCon outputs instead of third SchuKo-socket with adapter plate. *********************************************************************************************** Was in need of a…
Print approx. €13.60–€16.62 excl. taxPreliminary estimate for PETGSource material: PET
A great tool for anyone looking to achieve precise, professional-level coffee preparation! This practical coffee distributor is designed to evenly distribute coffee grounds before tamping. It's perfect for those looking to achieve…
Elevate your coffee game with this Adjustable Coffee Leveling Distributor . Easily set the depth for perfect, even grounds before tamping, ensuring consistent, rich espresso shots. Adjustable Depth: Customize from 5-10mm. Even Grounds…
Made this mount to secure the JDI Ghostbox bluetooth stereo using velcro. The ghostbox didn't have any mounting tabs and I wanted to keep it from moving around.
Elevate your coffee game with this Adjustable Coffee Leveling Distributor . Easily set the depth for perfect, even grounds before tamping, ensuring consistent, rich espresso shots. Adjustable Depth: Customize from 5-10mm. Even Grounds…
Tis is an integrated mount and cover for a pair of Wago 221-415 blocks. Apart from the printed parts, you'll need 6 M3 threaded inserts (3mm or 4mm are fine, but there is space below to allow different screw lengths). You'll also need 4…
Big T had no power distributors with PowerCon input so I just created an inlay for rebuilding the power input.
I am a great friend of the Varia VS3 coffee grinder! For an optimal result, I always moisten my beans with 1-2 sprays of distilled water before grinding. Unfortunately, this makes them a bit "sticky" and they often don't fall completely…
You will need two neodynium cylindical magnets (3x6mm) 15 acupuncture needles (0.3x55mm, I used ones with silver handle - just for aesthetic purpose - outermost needle handle is visible through the side of the body) The trickiest part is…
Lamp connection Cover Hexagon with central screw connection, so old plugs can continue to be used directly. The cover is available with one and two cable glands as well as 100x40mm and 70x30mm. Lampen Anschluss Cover Hexagon mit zentraler…
A “dumb” Usb Type C power distribution thing, for low power devices like ESPs. It uses a Type C trigger board and 4 Type C break out boards. The main advantage to normal type c chargers is that the power doesn't get interrupted for all…
Dieser Verteilerhalter besteht aus zwei modularen Teilen: TPU_DIN: Der flexible Teil des Halters, der aus TPU gedruckt wird, sorgt für optimale Anpassung und Rutschfestigkeit. PTEG_Halter: Der robuste Basishalter, aus PTEG gefertigt,…
This requires less material (but is still strong). The added notches at the top so that one can add a distributor disc to better focus how the water hits the plants below. (Uploaded model was a test article, I haven't yet fully explored…
Printed on its back with no supports, product clicks in there with no glue etc. Used infill modifiers to have more infill on leg connectors.
VW 2.8 vr6 distributorless conversion distributor cap made for AAA engine but should work with other old vw engines .
Here's a model that I made for the Frosthaven summons, the Toxin Distributor (https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-toxin-distributor-front.png)! As you can tell, this guy's…
I joined the 2 parts together. This is more convenient if you don't have the right glue at hand.
Still needed: 4x Spax Rückwandschraube 3x20, 4 x M4 heat set insert, M4 bolt, wood plate for fixation. The hole size from the distributor wasn't perfect for me. With a little patience it worked but could be optimized.
Lejek z dystrybutorem do kawy kolba Delonghi 51mm, pla, petg
https://www.bkl-electronic.de/en/product/073330 https://www.conrad.sk/sk/p/bkl-electronic-073331-iec-adapter-c13-c14-iec-c14-zastrcka-10-a-iec-c13-zasuvka-10-a-iec-c13-zasuvka-10-a-cierna-1-739605.html
A simple application for my Printbuchse . Replaces the old distributor plates/Verteilerplatten which are not part of the current fischertechnik program any more. The FreeCAD file is parametric, change the block_len parameter on…
5 darts can't fit all the way back because of the recessed lip of silly shells, so they have to be seated forward. Since they're seated about a cm forward, the back of the shell can be used to redistribute the air to each dart and build a…
Power brick mount. 55mm x 40mm. With a 5mm hole for screws. You can also add zipties for cable management.
Remix of RonnynnoRMan work for my old 58mm stainless steel Bialetti venus 4tz with longer funnel for more stable design
This is a 3D model of a coffee distributor tool, perfect for ensuring an even and consistent tamp in your portafilter. The model supports both 53mm and 58mm sizes to fit different espresso machines. To assemble this model, you’ll need…
GERMAN Kfz-Stromverteiler für Wago-Klemmen. Auf jeden Fall ist die Verwendung eines Stromabgreifers mit Sicherung NOTWENDIG! https://ebay.us/lLddsu(Werbung ) Die Leitungen müssen mit Kabelbindern am Zugschutz des Halters befestigt werden.…
Hi! I made this coffee distributor for the Flair Go. My print: Filament - PLA Layer Height - 0.08mm Enjoy your brew! ☕
For 58mm portafilters (E61). Can be used for both 2-cup and single-cup portafilters. After grinding, tap lightly and turn the funnel. Turning counter-clockwise moves the powder more towards the center; turning clockwise moves it more…
I offer the 3d files of my KAVIO WDT tool with magnetic handle, tamper, funnel and distributor (for 58mm) so that you can print your own. The model is a registered design in my name with the German Patent Office. It is intended for…
Commissioned by a friend for his Lanchester's Lucas distributor, specifically the DVX4A but the Lucas part number 408945 is listed as fitting all the other distributors shown in the title of this model. Apparently there are a lot of those…
The bottle top can be screwed onto a wide neck flask with GLS80 threads. The 4 available ports can be fitted with either a GL45 thread or a t-piece for additional ports. All pieces attach by a bayonet lock. I printed in PP for good…
I recommend every hobby barista, especially those who are just starting out, to use a leveling tool. I designed this one for our SAGE Barista Touch. It is based on the original dimensions of the trimming tool from SAGE and fits perfectly…
Spread salt, corn, sand ect. without getting your hands dirty. No support is needed, if you print it standing up.
Replacement Part – Seed Distributor for Planters (Euro Mount, 3D Printable) Description: This is a 3D-printable replacement part for mechanical planters with Euro Mount. It is the plastic seed distributor mounted below the seed hopper,…
Ein Playmobile Verteiler der mit den weißen Schlauchverbindern genutz werden kann Man sollte ihn in dieser Größe lassen, weil das Modell sonst vieleicht nicht mehr passt Viel Spaß beim Drucken und Benutzen :) A Playmobil distributor that…
Pretty simple remix. One piece. Twists into locking position. I was able to print without supports and just had to cut away about 1 string layer by the locking mechanism. Category: 3D Printer Parts
This is an XT60 & XT30 power distributor that can be daisy-chained. There is enough internal space to wire them however you like.
The plate was made in 5083 cast alu, pre-milled for flatness. The round plug was made out of PET, I think it was. We do not sort our plastics well at work. The plate recieves a O-ring with the dimension of 50x3.5mm, so IDxThickness. The…
This WAGO holder + case can be used to distribute from one power cable to up to 8 outputs. Using a 5 core mains cable for power supply, you can balance the power load on two phases. Ideal for devices with a high initial current (like…
Description: This modular water distributor is designed for indoor gardens, hydroponics, or aquarium setups. It acts as a manifold between your main pump and several individual irrigation lines. The system consists of two main parts…
I am rebuilding my distributor and taking my sweet time. While its out of the car I want to close up the hole which goes into my engine.
Housing to wire 2 Powercon Sockets and external devices. There are different versions for different Rack Panels. 6P (Hole distance: 34,5mm):…
This slightly absurd model is intended for use with my already published Levelling Tamper model for the Dedica Espresso machine. (Linked bellow) The entire thing has been proportioned such that the handle sits flush against the guide when…
Distributor and Cone shaped tamper for the excellent Flair Pro 2 Espresso maker. I found that my Flair Pro 2 tend to start dripping from the outside first then to the middle during pre-infusion. So I made the distributor to help me even…
A great tool for anyone looking to achieve precise, professional-level coffee preparation! This practical coffee distributor is designed to evenly distribute coffee grounds before tamping. It's perfect for those looking to achieve…
Elevate your coffee game with this Adjustable Coffee Leveling Distributor . Easily set the depth for perfect, even grounds before tamping, ensuring consistent, rich espresso shots. Adjustable Depth: Customize from 5-10mm. Even Grounds…
This is an addon of distributor for the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ). This add on is a complement of : https://www.thingiverse.com/thing:2599638 Print instructions Printer: Geeetech A10 Rafts: No…
Made this mount to secure the JDI Ghostbox bluetooth stereo using velcro. The ghostbox didn't have any mounting tabs and I wanted to keep it from moving around.
Elevate your coffee game with this Adjustable Coffee Leveling Distributor . Easily set the depth for perfect, even grounds before tamping, ensuring consistent, rich espresso shots. Adjustable Depth: Customize from 5-10mm. Even Grounds…
Tis is an integrated mount and cover for a pair of Wago 221-415 blocks. Apart from the printed parts, you'll need 6 M3 threaded inserts (3mm or 4mm are fine, but there is space below to allow different screw lengths). You'll also need 4…
4x 4mm 1x 12mm Spare part for a garden fountain. Please note, 3D prints aren't waterproof, but it works fine 😀
If you want to go COP conversion on your 2.gen 3S-GTE, and want to use stock sensors, this replaces the stock distributor lid.
Cover to be used in addition to the silicon covers provided by Victron. I was looking for a more finished look compared to the ends of the busbar just sticking out. The cover can be screwed to the backboard with a 4x30mm screw.
I needed a case for the ONPIRA power distributor W2x6H. The case is held close by the mounting screws - M2,5x30 - and can optionally be fitted with a piece of clear filament (PETG or PLA, 1,75mm) as a light guide for the Power LED. Just…
A 13mm distributor with 4 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
This is a case for 2x17 pin dupont distributor, Category: Electronics
This come from a discussion with a friend who said that bird like to get fur from pets to build their nests. So I wanted a design a bit organic that would be nice to print and then voilà.
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
This is a new Timing Cover and the Distributor for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. The assembly of this part is meticulous; the components are…
Cover the area where the distributor used to go, using this part. There are 2 version uploaded: One is designed for using thread inserts with. One is designed for using M6 heat-sert / knurled nut inserts (as seen in pictures). The OD of…
Aquarium Wasser/Luft Adapter 12mm / 20mm auf 5X 6mm Schlauch Verteiler für Wasser / Luft auf 5X 6mm Schlauch Bitte beachtet auch meine Designs auf https://www.thingiverse.com/rolfmobil/designs und…
a thing to hold and pass out your koozies. you better have a dialed in printer that is really good at bridging. when it gets the very back, which would be the top of the print, it has some difficulty with the bridging because of the long…
My take on a Anderson Powerpole distributor. The supplied stl files give you some options, but you can use the supplied OpenSCAD file if you want to increase the number of plugs. Part list: automotive fuses fuse clamps ("cable shoes")…
Big T had no power distributors with PowerCon input so I just created an inlay for rebuilding the power input.
Cover for 53mm Coffee Distributor. I am using the distributor for my Sage/Breville Bambino Plus 54mm portafilter but also compatible with that of Breville 800 Barista Series. PETG or PLA (PETG preferred) 0.2 layer height 0.4 nozzle no…
The pad fits 53mm/54mm coffee distributors and tampers for my Sage/Breville Bambino Plus and Breville 800 Barista Series with 54mm portafilters. PETG (preferred), PLA 0.4 nozzle 0.2 layer height 20% infill no supports
The pad fits 58mm coffee distributors and tampers. PETG (preferred), PLA 0.4 nozzle 0.2 layer height 20% infill no supports
A clip for a Brennenstuhl socket strip that the switch is not unintentionally turned off. Easy to clip on without tools. Printed on a Prusa MK3S+ with PLA and a layer height of 0.15mm.
Držák OLED displeje 128x64 https://arduino-shop.cz/arduino/1569-iic-i2c-oled-display-0-96-128x64-bily.html?gclid=EAIaIQobChMIhrrl4pKn5wIVzzUrCh2_-w5yEAQYASABEgISxvD_BwE pro rozvaděč v krytce záslepky. Zabere v rozvaděči 2 pozice. Print…
Tlačítka: https://pihrt.com/elektronika/323-moje-raspberry-pi-plugin-ospy-8-tlacitek-8-led Pro zalévací automat jsem si vytvořil plugin pro jednoduché ovládání zalévače bez nutnosti se připojovat přes prohlížeč... Obvod obsahuje 8…
LCD: https://pihrt.com/elektronika/315-arduino-uno-deska-i2c-lcd-16x2 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15mm Infill: 15% Filament: Prusa, DevilDesign... PETG Post-Printing Category: DIY
I made this when I was converting my AE86 to a coil-on plug setup.
espresso portafilter 51mm needs a tamper, mixer & distributor, so here you can find all of them beside the base for them
Coffee Comb The instantaneous, inexpensive tool for better coffee. You have a porta filter / Siebträger coffee machine and want to get better coffee? Well… This is the tool you didn't know you needed. Print it (10 minutes) and try it. The…
A needle distributor. Perfect coffee results thanks to the even distribution of the coffee powder in the portafilter. Designed for a 53mm portafilter.
I liked the Coffee Grounds Funnel/Distributor for Gaggia Classic by kitahiro921 which I used for what felt like a decade without any issues. The issue with it is that it is not modeled with printing in mind. It requires support and then…
A small knob for outdoor water distributors. Prints fast in ASA and has an easy fit. Check attached pictures for example applications. Fits a wide range of off the shelf outdoor water distributors. Print instructions Prints upside down…
Dies ist eine Verteilerbox für Messkabel mit 4-mm-Büschelstecker (auch 4-mm-Bananenstecker genannt) mit 4 Buchsen auf der Vorderseite und 4x4 Buchsen auf der Oberseite. Die Spannung jeder Buchse auf der Vorderseite wird auf vier Buchsen…
This thing is five way distributor for vacuum or compressed air. It can be used for vacuum tensioning, airbrush or other air applications. I use the part for vacuum tensioning on my cnc machine. To finish the part jou need the following…
A motorbike power distributor. In addition to the case, printed in PETG, you need a copper plate measuring 15 mm x 57 mm and 1.5 mm in thickness. At both ends of the copper plate, I punched out two semicircles of 8 mm diameter. A 7mm…
A soap distributor support for my shower. Only two m4 screws used to fixed around the pipeline. Inpired from a Simone Giertz make https://www.youtube.com/@simonegiertz/videos Soap distributor used:…
Simple base to hold and clean WDT/needle distributors that don't come with a base already. Simply fill with rice and use the distributor as normal to clean the needles. Designed for the 58 mm version (e.g. MHW-3Bomber's one) . If you have…
![Coffee Distributor for Levelling Tamp Base [51mm Dedica Portafitler]](https://media.printables.com/media/prints/5eb8501d-50c5-4060-973b-a98990194c18/images/11762876_ffebc64b-3910-4176-9108-1b988214cd7e_0564bfe5-71e0-4eb9-b8c3-ef5e1a684ce2/img_1249.jpeg)
