1 / 3
Espresso Needle Distributor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Needle distributors can be used to remove clumps from grounds that have been poured into the portafilter.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 60
- Makes
- 1
- Views
- 941
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Instructions
You will need to print 8 copies of the part in order to make one complete distributor. I recommend gluing them into 2 groups of 4 and then gluing the 2 semi-circles together.
Print settings
Layer Height: 0.2mm
Support: None
Build Plate Adhesion: None ( I tested with brim but trimming it off the needles was very difficult)