1 / 1
Case for ONPIRA W2x6H Distributor / Gehäuse für ONPIRA W2x6H Verteiler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the ONPIRA power distributor, with a light guide for the power LED.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 64
- Makes
- 0
- Views
- 220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a case for the ONPIRA power distributor W2x6H.
The case is held close by the mounting screws - M2,5x30 - and can optionally be fitted with a piece of clear filament (PETG or PLA, 1,75mm) as a light guide for the Power LED.
Just insert the clear filament into the hole right above the power LED and cut flush with the case top.