1 / 1
Case for ONPIRA W2x6H Distributor / Gehäuse für ONPIRA W2x6H Verteiler
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the ONPIRA power distributor, with a light guide for the power LED.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a case for the ONPIRA power distributor W2x6H.
The case is held close by the mounting screws - M2,5x30 - and can optionally be fitted with a piece of clear filament (PETG or PLA, 1,75mm) as a light guide for the Power LED.
Just insert the clear filament into the hole right above the power LED and cut flush with the case top.