1 / 5
2x4 Power Distributor WAGO221
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1 cable in, 8 cables out. Uses two phases of a 5 core power cable to split output into two sets of four cables each.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 15
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
This WAGO holder + case can be used to distribute from one power cable to up to 8 outputs. Using a 5 core mains cable for power supply, you can balance the power load on two phases. Ideal for devices with a high initial current (like power adapters).
NOTE: the brackets have a very tight fit. Slide the WAGOs down from the top until they snap in.
The FreeCAD models are highly configurable via variables in case you need some adjustments.