1 / 1
Mill City 500g Roaster Air Pressure Gauge Riser Bracket — zdjęcie 1

Mill City 500g Roaster Air Pressure Gauge Riser Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bracket to raise the air pressure gauge on a Mill City Roasters 500g roaster.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I got new thermocouples for my MCR 500g roaster, but the ET probe wouldn't fit in with the air pressure gauge in its factory location.

This bracket rises the gauge up enough to fit the probe in comfortable and also allows for it to be easily removed for cleaning.

The tolerances are kinda tight, so don't fully tighten everything until the gauge and all the screws are in their place.

---

Printed in PET-G; 15% infill; .2mm layer height

I used mouse ears on it, but you probably don't need them.

Tagi