Fox Mudguard Mount for Non-Factory Spec Forks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standoffs that allow mounting of a Fox 36 or 38 mudguard to 36 and 38 forks without bleeders to mount to.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — NoDerivatives
Fox mudguards mount to the arch and the lower leg bleed ports. Only the factory forks have these bleed ports but all forks have the fastener holes in the arch.
I made these standoffs to zip tie to your lower leg with the mud guard to hold it on like the factory fork. It was designed for the 36 and 38 mud guard and forks but may work for other forks by using zip ties to hold the top of the guard to the arch.
Print info:
No supports needed as long as you orient the “pin” with the head down and the “Base” with the flat side down.
Any material and any reasonable slicer settings should be fine. (at least 2 perimeters and 15% infill)