1 / 1
Delack rear cover with MMU tube slots — zdjęcie 1

Delack rear cover with MMU tube slots

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified rear cover for the Delack with holes for the PTFE tubes for your MMU

Ocena
0 / 5
Polubienia
0
Pobrania
17
Wydruki
0
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

This is a modified rear cover for the Delack with holes for the PTFE tubes for your MMU.  You can mount it one of 4 different ways by turning it depending on where your buffer is.  Seems to make the bend in the tubes less dramatic.  This cover is a little thicker than the original and you will need some slightly longer screws to mount it.  

I printed this with PETG with 15% infill.

All credit goes to the originals I borrowed from: Photon for the MMU holes used in the top skirt rear and 3D Sourcerer for the excellent Delack enclosure and parts.

 

 

Tagi