Delack rear cover with MMU tube slots
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified rear cover for the Delack with holes for the PTFE tubes for your MMU
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a modified rear cover for the Delack with holes for the PTFE tubes for your MMU. You can mount it one of 4 different ways by turning it depending on where your buffer is. Seems to make the bend in the tubes less dramatic. This cover is a little thicker than the original and you will need some slightly longer screws to mount it.
I printed this with PETG with 15% infill.
All credit goes to the originals I borrowed from: Photon for the MMU holes used in the top skirt rear and 3D Sourcerer for the excellent Delack enclosure and parts.