1 / 2
Popeyes 1 Gal Water Jug case/Protector — zdjęcie 1
1 / 2

Popeyes 1 Gal Water Jug case/Protector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A protective case for the Popeye's (supplements) brand 4L/1 Gal water jug.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

I designed this protective sleeve for the Popeye's 4L/1 Gal water jug. I like this water jug, but it is extremely fragile, and I have broken two (friends have also broken multiple). It takes less than a foot drop for the bottom to crack, and now this jug is useless, so this should help prevent it from suffering a crack when dropped. 

Some scaling might be needed, 100% or maybe 101% I suggest a fast, rough print in low infil and high layer height to check fitment before going for the high infill final print

Recommend using PETG or ABS, as PLA is far too fragile for this application. also recommend high infil 70-100%

Tagi