Mini Tower Case for Dell Precision 3430 SFF Motherboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The base of the same case made by MortalWombat, removing the solid and adding a honeycomb design and other things
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 1001
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
In this case, it's a Precision 3430 SFF. The original PSU passed a way. I decided to make some improvements, such as adding a graphics card, and for that, I needed to replace the ATX PSU. However, since I wanted to install it in a conventional case, it was too much work. The front ports were a problem, either obscured or breaking the case. Searching online, I found some similar ones for my needs.
The honeycomb design provides good airflow, and the hexagons can be used to add cable supports.
PRINTING
Material: PTG
Color: White
3D Software: Thinkerkad
Infill: 25%
Supports: Yes
ASSEMBLY
Based on the diagram in the original model, all the screws are M3 with their respective 6mm, 10mm, 18mm, and 20mm nuts.
I also used a few M3 brass inserts.
DO NOT overtighten the screws to avoid bending the parts and causing a bulging appearance.
PARTS:
ATX to Optiplex Adapter Cable https://www.ebay.com/itm/125292974505
M3 Black Hex Screw Set
https://www.amazon.com/dp/B0DR92YVL5?ref=ppx_yo2ov_dt_b_fed_asin_title