Mini Tower Case for Dell Precision 3430 SFF Motherboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The base of the same case made by MortalWombat, removing the solid and adding a honeycomb design and other things
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 87
- Makes
- 0
- Views
- 1,001
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
In this case, it's a Precision 3430 SFF. The original PSU passed a way. I decided to make some improvements, such as adding a graphics card, and for that, I needed to replace the ATX PSU. However, since I wanted to install it in a conventional case, it was too much work. The front ports were a problem, either obscured or breaking the case. Searching online, I found some similar ones for my needs.
The honeycomb design provides good airflow, and the hexagons can be used to add cable supports.
PRINTING
Material: PTG
Color: White
3D Software: Thinkerkad
Infill: 25%
Supports: Yes
ASSEMBLY
Based on the diagram in the original model, all the screws are M3 with their respective 6mm, 10mm, 18mm, and 20mm nuts.
I also used a few M3 brass inserts.
DO NOT overtighten the screws to avoid bending the parts and causing a bulging appearance.
PARTS:
ATX to Optiplex Adapter Cable https://www.ebay.com/itm/125292974505
M3 Black Hex Screw Set
https://www.amazon.com/dp/B0DR92YVL5?ref=ppx_yo2ov_dt_b_fed_asin_title