1 / 2
Blink Doorbell mount for 4" vinyl siding + J channel — zdjęcie 1
1 / 2

Blink Doorbell mount for 4" vinyl siding + J channel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Doorbell mount design to clip into j channel on 4" vinyl siding. No screws or adhesive required.

Ocena
0 / 5
Polubienia
3
Pobrania
58
Wydruki
0
Wyświetlenia
309
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Prints with supports. I printed in petg and so far it has been holding up well. I did not need to screw into the siding or use adhesive though that would be more secure. I used 3mm screws and tapped the holes, but there are recesses for nuts in the design as well.  

Tagi