Wicked Wicking Germination System - Self Wicking seed starter system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 16-cell self-watering seed tray just print, add wicking mat, sow, cover and relax. healthy sprouts, zero hassle.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing Tips & Materials
Wicked Wicking Germination System is designed to be printable on, and optimize the available print space on a standard Prusa I3 Mk3s+ printer. Of course no support needed.
Reservoir
This part needs to be watertight.
- Increase the number of perimeters (shells)
- Print slightly hotter than the standard temperature for your chosen filament
This helps seal the layer lines and prevents leaks.
Humidity Dome
Print in a transparent filament. I use transparent PETG, but clear PLA might also work (though untested). It doesn't need to be crystal clear but should allow diffused light to pass through.
Other Parts
All other parts are printed in PLA and work well without special settings.
Vent Cover Threads
Depending on your printer, the threads on the vent cover and cap may be a bit tight. If so, screw them back and forth a few times until they move smoothly.
Non-Printed Parts
The only part you need that isn't printed is a wicking mat. Suitable materials include:
- A piece of an old cotton T-shirt
- A strip of towel
- Commercial options found online under terms like “wicking mat,” “capillary mat,” or “watering mat”
Wicking Tray Features
The wicking tray isn't just a support for the seed pots and mat. It also:
- Holds the wicking material above the waterline
- Can be used to push out seedlings when it’s time to transplant
- Doubles as a soil press to create uniform seed divots before planting