Liczymy pasujące modele…
EN: The plug for rain gutters of the Israeli PALRAM Multiline 6x8 greenhouse. Printed from PETG "flat" with supports. Greenhouse has rain gutters along the longer sides with outlet on all 4 corners. I joined 2 corner outlets together with…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design is part of my Mushroom Grow Tent (Martha Project). https://www.printables.com/de/model/968799-300-grow-tent-for-mushrooms-overview ------------------------- ◾ 2023-12-23: Update your Martha with an even further optimized air…
Introducing a set of 4 reusable elements that can be used to construct mini greenhouses of any size for your plants. These parts can be 3D-printed and assembled into desired shapes. To create a humid environment for your plants, wrap the…
Simple pots for seed starting. I also added a frame so you can stretch the film and create a greenhouse.
As the original clips for fixing the side panels of the greenhouse broke on install really easy, I tried to make a simple replacement. It is a tight fit, but it works so hope it's useful to others as well. I printed it in PETG lying down…
Mounting Adaptor for Floorabooster 200 Lights to Juliana Greenhouse (and non slip loop) In the fotos below the printed black adapter the mounting parts are shown that come with the "Bio Green Pflanzenleuchte Florabooster 200 120/90/60 cm"…
Built with hot glue and greenhouse plastic! Edges are to cover the plastic to make it look cleaner but are not needed structurally. Print the following for a full piece: Bottom x1, Top x1, Sides x4, Edge Height x4, Edge Base x7, Short…
A connector for nutella glass jars in two sizes. Small size fits perfectly the small and medium nutella jar and the Big size the big Nutella jars it’s easy to print, no supports! (dont turn the model upside down, print it as it is…
3D-Printed Modular Greenhouse – Product Description This project features a fully customizable 3D-printed modular greenhouse designed for small plants, seedlings, and herbs. The system combines practical plant care features with a…
The door to my greenhouse did not come with any type of handle so I created this one to make it easier to open the door from both inside and out.
This is a 200mm bracket for a greenhouse. It has 7mm holes for crop bolts. I printed it with 15% infill for a little more strength.
Individual hex cover made to help sprout the seed and maintain climate control. Meant to be designed with clear filament.
Film fixator for greenhouse arcs. Printed from UV-resistant plastic
Just tie a knot on one end of the string, put string to holder and hang on it whatewer. Ready only for special angle. Best seem to be 4 perimeter and infill about 30% (almost any kind) Hole diametres: 1,5mm 2mm 3mm With test was weeker…
Replacementpart for Greenhouses. This Corner is used to connect walls of Greenhouses. I usually print it laying with supports to get more strength from walldirections
Greenhouse with special Carrots Mini greenhouse: A special money gift idea. The base is 150 mm long with a width of 120 mm, the total height to the roof is 130 mm. I built this little greenhouse for my girlfriend's birthday because she…
Pipe connector for garden hoops. Base is overflow pipe 21.5mm Hoop is using 20mm MDPE pipe.
Simple leaf guard for a 21mm downpipe on a greenhouse. Stop debris going into your water collection system.
A simple stand for illuminating herbs in winter. The stand consists of printed elements and a wooden shaft with a diameter of 28 mm. What printed items do you need? - Stand x2 -Top corner x2 -Bulb clamp (The quantity depends on the number…
I bought a cheap plastic greenhouse and needed to ventilate it so I designed this 2 piece vent. It should work well on most materials upto about 8mm thick such as plywood, corflute, card, plastic, etc. The holes are 4mm and I used brass…
I was lucky enough to be given a greenhouse from a neighbor who was no longer using it. The T-rail screws that came with the greenhouse, which you use to attach things like strings, had seen better days though. I wasn't very happy with…
Set of connector hubs for creation 2 frequency geodesic dome yurt. I designed it as a shelter for my daughter, (yeah I could use couple of chairs and blanket but I wanted to try something new :) ) Dome is usable also as a small foil…
Clips onto the bar of a tent greenhouse. Hole big enough for magnet to attach a magnetic/metal LED bar.
This design was created for the AOSOM greenhouse that is in my garden, it comes with built in gutters but no downpipes. The connector attaches to the hole for the downpipe and fits to a hose that can then be fed into a suitable water…
2 Store Greenhouse , I made for a Pair of Growing lights. Drawing Includes the Rod Lenghts for a base version. Technicaly Stackable when you need a third floor just print additional 4x Connector nr.2 and 2x Stiffeners. By Remixing the…
Print in PETG. Made to be attached to the profile of a greenhouse. But can also be screwed to a wall. Nuts and bolts may need to be printed at 95% size.
You can connect two jars and make small greenhouse for one plant. I use it to make roots for Nepenthes. PLA is ok. Category: Outdoor & Garden
Small storage box that can be attached to the frames of most green houses like shown in the picture. Handy for plant fixation stuff, wires etc.
I had issues with humidity in my mini greenhouse, so I decided to attach a fan that adjusts the speed based on the humidity level inside the box. In the somewhat unlikely event someone else has the same greenhouse and want to add a fan,…
Uses an Ikea bell cloche (Morgontidig), to stack on a Gradvis plant pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have been discontinued.…
Easy to print plant holder. Insert the plant holder into the aluminum profile of your greenhouse and attach any string or wire. Printing Instructions No supports needed.
Uses an Ikea bell cloche (Morgontidig), to stack on a Chiafrön flower pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have been…
Uses an Ikea bell cloche (Morgontidig), to stack on a Drakfrukt or 4 ¾ Forenlig plant pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have…
The IKEA Nojig 15x20x5 cm trays fit into the IKEA Åkerbär/Akerbar greenhouse, so I made some self watering pots to go on top of the Nojig for my small plants. I fit 4 sets into my 65 cm greenhouse. I used the Nojig trays to be sure my…
I am including separate Fusion 360 and step files for each piece so that modifications can be made for your own purposes. There are many ideas and designs available for re-purposing an old ATX power supply unit. I had a few of my own…
This is a three part corner clip for hanging insulation or shading in your greenhouse. It is designed to clip onto the flat sections in the corners, not the t-track sections. I have used PETG successfully but I would imagine they would be…
Over the years, I've built several versions of temporary, cold-weather greenhouses out of PVC pipe and plastic sheeting. This year was no exception, but I did make some improvements this time around. With a piece of PVC pipe and two of…
I designed this small glasshouse dome for rooting my Alocasia Corms, some other cuttings in disposable glasses in moss and to highten the humidity for some small plants. It orignially designed it to fit perfectly over a small nutella…
Give your sushi packaging a second life. The transparent cover and the black waterproof tray is perfect to up-cycle it to a small greenhouse. Grow your plants and be environmentally conscious. Print it in black and it heats up even better…
amazon greenhouses come as simple as they can get. with these clamps you can easily 3d print a solution to route your misting hoses any way you want. they are sized 25mm on one end and the other is for ¼ inch hose. feel free to let me…
A set of parts for creating a mini greenhouse. The original size of the parts is intended for tubes with a diameter of 16 mm. In the title picture, the length of all the tubes is 500 mm, while the width of the greenhouse is approximately…
Simple pots for seed starting. I also added a frame so you can stretch the film and create a greenhouse.
Printer: Prusa MK4S s MMU3 Supports: recommended Resolution: 0.2 Infill: 15 % Printable greenhouse gutter adapter for collecting water through a standard hose. After installation, the joints need to be coated with sanitary silicone.…
Work in progress. You may need a lot of time to file/trim to make everything fit. This is more of an inspiration for you instead of a print-and-play model. Good luck. I used Vevor 2x4 feet 8mm thick panels. Two panels is enough for entire…
This is the first thing I made using Fusion 360 and was multicolor printed on the MMU2. I didn't see anything else like it out there already so enjoy!
As the original clips for fixing the side panels of the greenhouse broke on install really easy, I tried to make a simple replacement. It is a tight fit, but it works so hope it's useful to others as well. I printed it in PETG lying down…
Hello, This is a solar greenhouse pipe clip model that I made to hold the foil on my greenhouse. It was designed using OpenScad and you can download and customize the code for your liking. To use this model you need to determine the…
For attaching shade cloth to the roof ridge of a greenhouse. Designed to fit a Halls greenhouse. Most PLA doesn't do that well in sunlight so you might want to use PETG, ASA or something else thats more resistant.
Enclosed version of my Gardena Gutter Adapter Water Collector with direct connection to a watering hose. Clips into 38mm gutters and holds in place. Gluing it to the gutter might be needed in case the hose is not fixated and can pull the…
Features: Enhanced support for the roof panel Simplifies cleaning of the rainwater passage Option to hang decorations that guide rainwater to the ground
The parts at the corners of the rain gutter on our greenhouse have become very brittle over the years, so I have replaced them with 3D printing. I recommend PETG or ASA for the print so that it is outdoor resistant. If you want to…
The aluminium profiles ends get blocked after assembly of a greenhouse, but i needed additional m6 bolts to mount accessories. Drilling without a centering jig is messy and ugly so i made this to streamline the process and make a much…
M6 ring nut for attachments etc. Handy for hanging things from Halls greenhouse frame. Might need supports.
Omdat de tomaten niet te veel in de regen zouden staan heb ik een serre gemaakt van elektriciteitsbuis van 16mm en een pvc folie. De folie zet ik vast met die clipsen rond de elektriciteitsbuis. Because the tomatoes wouldn't be in the…
We wanted to put pallet collar greenhouse for our cucumbers that we planted. The greenhouse in question is supposed to be installed with spikes to the soil. We dont have any soil to install to so I modeled corner brackets for the pallet…
If you like what I do here, come visit my Facebook group. 3D printed Grow Tools & Accesories - free .stl MX_creations proudly presents : “The Frame” - the most powerful replacement for broken corner pieces "The Lift" - offers the option…
Use support on built plate only Z=0.2 Use change color on Z=1,2 from transparent to grey (I used Glow in the dark & Grey galaxy) Print orientation
A clip for hanging insulation or shading in your greenhouse. Simply pop the washer over the end and push through the insulation or shading material and twist the end into the track of your greenhouse uprights.
I've found this grid nursery here on Thingiverse so I decided to design a Greenhouse to go on top of it. The original design has a removable bottom and press to create the pods using my own living soil. I found it very handy! check it…
Either you have broken original part or realised how rubbish original slider, this should be ultimate fix. In case your greenhouse is different please post your remix, I've included Sketchup file. Printed in Filamentive recycled rPLA and…
This is a slider for a 30 year old greenhouse door. It fits an L shaped plastic profile, 20mm x 30mm (2.5mm wide) ,that is screwed to the floor with the 20mm side sticking up. It is best printed in ASA (because it's outdoors), but PLA…
Conduits snap into place and clear around all panel tabs and the fan mount. For the fan mount you will need to trim two of the original metal shelf brackets down to slot into the cutouts on the backside of the fan mount model allowing it…
My first upload - I wanted a way to plug the ends of the polycarbonate greenhouse panels that folks like to use for DIY fish tank lids. This fits as-is but I printed mine at 103% to fine tune it, YMMV. I recommend printing a test or two…
This is my idea of a greenhouse for the human colony on mars. It features three large tanks for water, oxygen, etc. There are no corridors between the buildings, because every building has it's own climate (For example forest, grassland…
These connectors are replacement joints for classic aluminium greenhouses, typically from the 1980s. They are designed to join aluminium tubes used in the frame structure and come in both 3-way and 4-way versions. Perfect for repairing or…
Magnetic holder for securing a greenhouse door. You will need four round magnets with a diameter of 12 mm and a thickness of 2.7 mm (e.g. from Aliexpress). Since neodymium magnets cannot withstand rain and moisture, I wrapped them in…
These feet fit the Saxon 3 tier mini greenhouse you can get in Bunnings, Australia. These greenhouses are $15 each at the time of this writing. However they are very unstable, as they just sit on their stumps. Slot one of these feet into…
Created these accessories for my Scandic Greenhouse Loki. Hooks are created to fit in the side and roof profiles. Cutout covers are for hiding sharp edges in unused assembly cutouts. Door hook holder is to fix the door hook, and avoid it…
NOTE! This is about installing 230VAC outlets. If you are not an licensed electrician, don't try to connect anything. Just print and mount the parts and let a licensed electrician do the wiring. This is some parts that I did to mount some…
This is a small mounting bracket that I made to attach some pipes for collecting rain water from our Willb garden greenhouse, but can be used to fasten almost anything to that "weird" profile. :) Print in TPU Put a M6 nut in the slot…
🇬🇧 This is an adapter that allows a rain barrel to be connected to the guttering of a greenhouse. As the manufacturer has not provided a solution for this, I designed and printed a suitable component myself. It can be connected to a…
Hi, this is my 2nd version of this model after some trial and error. I finally got it perfect, in the picture the blue one was my first model but now I have got it. The problems in the first one was bad, like it would rip off the top…
This print is a set of clips for upcycling an empty PET bottle into a small greenhouse. A large bottle is probably needed, I use 8L water bottles rather than 1.5L soda bottles, hence the need for four clips. The print has been designed to…
This is a simple hook for hanging string lights and other stuff in your greenhouse. Just insert it into the aluminum rail and twist 90 degrees to lock it. You can easily adjust the scale when printing to fit your rail dimensions if they…
I needed plant tags for my school greenhouse. Students often mis-label plants. I can customize the labels so each plant can be properly identified when we have our plant sale! This plant tag can be imported into any design software and…
I used the metal frame from a “Harbor Freight portable garage” 10' x 17' to build a greenhouse. I used about 100 of these clamps to hold the 6 mil greenhouse plastic onto that frame. They are spaced about 1' apart. One or two zip ties…
Mounting Adaptor for Floorabooster 200 Lights to Juliana Greenhouse (and non slip loop) In the fotos below the printed black adapter the mounting parts are shown that come with the "Bio Green Pflanzenleuchte Florabooster 200 120/90/60 cm"…
Hello, Here is my entry for the PET bottle recycling contest. The idea came to me because we are in the spring and the planting begins. this object allows easy opening for watering and an adjustable ventilation. I adapted the model…
These parts are hard to find on the internet and I needed a few. Hope this helps you out, if you have one of these greenhouses.
Built with hot glue and greenhouse plastic! Edges are to cover the plastic to make it look cleaner but are not needed structurally. Print the following for a full piece: Bottom x1, Top x1, Sides x4, Edge Height x4, Edge Base x7, Short…
This fitting is used to connect standard 3" air duct, as used for bathroom fans, to the poly sheeting used in inflatable greenhouses. It can be purchased, but is not readily available at most local suppliers, so I printed some. To…
A connector for nutella glass jars in two sizes. Small size fits perfectly the small and medium nutella jar and the Big size the big Nutella jars it’s easy to print, no supports! (dont turn the model upside down, print it as it is…
Mini Greenhouse Lid – Transparent Plexi Cover (Remix) I found a great seed-starting tray model with small pots and decided to turn it into a fully enclosed mini greenhouse. I designed a matching top frame that holds transparent plexiglass…
Original Reddit Post IMPORTANT NOTES If you have a large enough print bed to scale all the models up to 115%, I'd highly recommend doing so, since the pillar details don't print at the scale at 100%. Everything is designed to fit on the…
3D-Printed Modular Greenhouse – Product Description This project features a fully customizable 3D-printed modular greenhouse designed for small plants, seedlings, and herbs. The system combines practical plant care features with a…
Hello, I bought a greenhouse but it had no adjustment for ventilation, so I made this adaptable system. If it's useful to you too, that's cool. Print. You can use the Gcodes for the MK2 ( The slider is bicolor ) Otherwise use PETG in 0.2…
The door to my greenhouse did not come with any type of handle so I created this one to make it easier to open the door from both inside and out.
This is a project made to cultivate different varieties of chilli, but you can pretty much cultivate anything in it. The other greenhouse models have no option to adjust humidity in them and as we all know, too much humidity inside might…
Transform your IKEA Akerbar Greenhouse into a charming Victorian-inspired haven for your plants with my exclusive Victorian Accessory Kit! Custom designed, this kit adds a touch of elegance and historical charm to your indoor garden,…
📢 Stay updated! Follow me on social media @ammedia3d for the latest news and new product releases ! 🚀 🎺 FEATURES 🎺 This is a 3D printable organizer for the board game Botanicus (inc. The Greenhouse expansion), designed to organise ALL the…
this is for limited old greenhouses might not work for yours, but check the ends before printing I had printed this in pla and it lasted a while but better to print in petg or asa or something for outside use use supports and also print…
