1 / 2

greenhouse window adjuster slide

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This kit is used to adjust the opening of the ventilation of your greenhouse window.

Aktualizacja u źródła: 20 wrz 2026

Informacje o modelu

20/09/2026 Update: Splited screw for horizontal print, following NooB_LEader 's experience.

Hello,

I bought a greenhouse but it had no adjustment for ventilation, so I made this adaptable system. If it's useful to you too, that's cool.

Print.

You can use the Gcodes for the MK2 ( The slider is bicolor )
Otherwise use PETG in 0.2 mm,
Full filling for the screw and scroll wheel, Slider @ 30%
No supports needed.
Assembly

Make a hole of 6mm. insert the rod of the screw inside. secure it with a 4 x 30 mm wood screw and a washer, that's all.

Let's print !