Greenhouse Rain Gutter Hose Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collect rain water from your greenhouse gutters using this hose connector and blind plug!
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 437
- Wydruki
- 2
- Wyświetlenia
- 2248
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Collect rain water from your greenhouse gutters using this hose connector and blind plug!
Both parts are provided as left and right variants, so they fit both sides of the greenhouse.
Requirements
The gutter must be 38 mm wide and 21 mm high inside.
The hose must have 19 mm diameter.
Printing Instructions
All parts should be printed with the gutter slide-in top-facing. Ensure that there is a plain surface on the insides so that the rain water can freely travel to the hose!
Supports are needed inside and below the hose connector.
I used PLA for printing. However, other materials like PETG may be a better fit for outside use.
Assembly
The parts should easily slide into your gutters and hold by friction. To collect even the last drop of rain, silicon may be used for sealing.