Eufy HomeBase 2 Desk Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for attaching the Eufy Security HomeBase 2 to the underside of a desk. V2 corrects indicator light hole position.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this mount to attach my HomeBase 2 to the underside of my desk.
Note: Version 2 corrects the positioning of the indicator light hole.
This is a friction fit mount, the HomeBase 2 is slanted from top to bottom so this mount matches that angle. It is meant to be installed upside down into the mount prior to screwing it on. There is a hole in the front to allow the indicator light to be visible. The back has a large cutout to allow easy access to the plugs and sync button.
The screw holes are set up for any standard drywall or construction screws.
I printed in PLA at 15% infill with auto trees and outer brim enabled. With these settings it used 98.75 grams and took just under 4 hours to print.