1 / 3
Vent Flaps for Core ONE — zdjęcie 1
1 / 3

Vent Flaps for Core ONE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dryer-style vent flaps for the Core ONE rear fans.

Ocena
4,889 / 5
Polubienia
170
Pobrania
439
Wydruki
28
Wyświetlenia
3551
Oceny
27

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

Requirements

  • 4x M3x8 screws (longer screws should work as well)

Printing

I printed mine using the 0.4mm Obxidian HF Nozzle and the 0.25mm SPEED Preset with Prusament PC CF. While I experienced significant warping for the flaps, this did not affect the functionality.

  • Print 4x CoreONE_Vent_Flap
  • Print 1x CoreONE_Vent_Frame (NOTE: The STL is upside down)

Installation

  1. Clip the flaps into the frame.
  2. Ensure they can rotate freely just from their own weight. Depending on the material you used for the print, you might have to sand the rotating part of the flaps, or add a few drops of silicone oil.
  3. Mount the frame to the back of the Core ONE.

Inspiration

I liked the Core One Flaps by Miroslav Černý, but was worried the added resistance would reduce the effectivity of the chamber fans. So I decided to create my own chamber vent cover based on the design of traditional dryer vents.

Tagi