1 / 1
Jaw Pin and Magnet Punch for Denture Bit Holder — zdjęcie 1

Jaw Pin and Magnet Punch for Denture Bit Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A snap in place pin for the jaw hinge and a punch to set magnets in place. See below for the bit holder model.

Ocena
5 / 5
Polubienia
43
Pobrania
201
Wydruki
4
Wyświetlenia
1811
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

I found the spec sized magnets were a tight fit, so I made a punch to smack them in place with a hammer.   Also a pin for the jaw for those who don't have the right sized fasteners on hand.

Cheers!