Zephyrus g16 2025 Laptop stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just made a notebook-specific stand. Originally made for the GA605KM.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I made it in a way that will raise the laptop above the mouse pad (~5mm), and the back of the laptop would be above my lamp (~35).
So, technically, there is a ~8-degree rise.
I would suggest printing it without infill and with 3-4 walls.
In my case, each stand is around 25g by weight.
If you want to have infill, without sidewalls, it could be done by the slicer.
V2:
- Fix the cooling suffocation. (Laptop designed to get the air from the sides and blow out at the back.
- Add the place for the rubber feet. (Glued TPU)
- Added feet and riser 5mm. Just in case. (not tested)
---
Inspired by: https://www.printables.com/model/474397-adjustable-framework-laptop-stand