Zephyrus g16 2025 Laptop stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just made a notebook-specific stand. Originally made for the GA605KM.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 88
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
I made it in a way that will raise the laptop above the mouse pad (~5mm), and the back of the laptop would be above my lamp (~35).
So, technically, there is a ~8-degree rise.
I would suggest printing it without infill and with 3-4 walls.
In my case, each stand is around 25g by weight.
If you want to have infill, without sidewalls, it could be done by the slicer.
V2:
- Fix the cooling suffocation. (Laptop designed to get the air from the sides and blow out at the back.
- Add the place for the rubber feet. (Glued TPU)
- Added feet and riser 5mm. Just in case. (not tested)
---
Inspired by: https://www.printables.com/model/474397-adjustable-framework-laptop-stand