1 / 3
Car Remote PCB Enclosure for Perodua MYVI 1st Generation
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remote PCB Enclosure for the OG Perodua MYVI
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I find it expensive to buy a replacement PCB enclosure for a 20-year-old car, so I design and print my own. The two halves can be friction fit together, a little trimming to the rubber membrane is required to ensure the enclosure can be close properly. To take apart the enclosure, simply pry open with a flat head screwdriver.