Mosquitto stamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Put a stamp on a mosquitto bite and forget about itching. That really works!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mosquitto bites itch. None of the treating creams work. The only solution I came up with is to firmly put a stamp directly to the middle of a bite. That helps to remove itching for a long time. I usually treat 1 bite 2 times during the day, after that it just disappears.
Files:
stamp – stamp with mosquitto image endraved on the bottom
mosquitto – fills engraving of the stamp (multicolor printing. aling both stamp and mosquitto in slicer (possible to switch materials manually))
Mosquitto_stamp-alltogether – just a stamp with no engraving
Mosquitto_stamp – fusion 360 file
Print suggestions:
Top part it 0.4mm thick for being sharp enoung. It's pretty fragile and should be printed slowly to help with cooling
Layer height 0.1-0.2mm
Plastic – PLA seems to work best