Featherweight Altimerters 38mm Av Bay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom 38mm Avionics bay mounted in the nosecone designed for the Featherweight Altimeters GPS tracker.
- Ocena
- 3 / 5
- Polubienia
- 11
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 450
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a coustom 38mm Avionics bay designed for the Featherweight Altimeters GPS tracker. Assembly is very simple, first you take the threaded insert and epoxy it inside the 38mm nosecone of your rocket and then you can thread in the av bay which can be taken in and out. Then you have to place a peice of velcro so sucure the battery and than finally you can screw it in wich the bolts coming through the battery side and the nuts on the tracker side.
Note the avionics bay also has notch at the bottom of which a shock chord for a parchute can be fitted to the device.
Also impacts during landing can be hard so it is recomented to print this out of PETG or stronger because in testing PLA has sometimes snapped under the load.