Photogrammetry scaling and color calibration targets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Photogrammetry target for scaling and color calibration of underwater 3D models
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Photogrammetry target for scaling and color calibration of underwater 3D models. Each bar has four 12-bit coded targets from Agisoft Metashape, and a cut-out shape for a Keldan Color Checker card. There are two cut-outs to add some stainless steel or lead for added weight. Given the size/shape of the print it is recommended to cool gradually/slowly after printing.
The version with _weights in the name has two cut-outs that allow 4x stainless steel square washers (M10 X 40 X 3.0) to be placed behind the color card, which provides sufficient weight for them to stay in place underwater. The color checker card can be glued in and/or secured with cable-ties.
The scaling bars are sized so that they can fit in drysuit/wetsuit pockets, or we usually carry them in a pocket like this: vertical velcro pocket.