Photogrammetry scaling and color calibration targets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Photogrammetry target for scaling and color calibration of underwater 3D models
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 410
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Photogrammetry target for scaling and color calibration of underwater 3D models. Each bar has four 12-bit coded targets from Agisoft Metashape, and a cut-out shape for a Keldan Color Checker card. There are two cut-outs to add some stainless steel or lead for added weight. Given the size/shape of the print it is recommended to cool gradually/slowly after printing.
The version with _weights in the name has two cut-outs that allow 4x stainless steel square washers (M10 X 40 X 3.0) to be placed behind the color card, which provides sufficient weight for them to stay in place underwater. The color checker card can be glued in and/or secured with cable-ties.
The scaling bars are sized so that they can fit in drysuit/wetsuit pockets, or we usually carry them in a pocket like this: vertical velcro pocket.