Wire Gripper for soldering
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on the wire gripper that is available to buy from various places
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is my version of the wire grippers you can get to hold two wire together while you solder them.
Printed in PLA at 0.3 layer height. I blocked supports everywhere except for two small supports at the ends of the internal slots, these were easy to remove with a pointed tool of some kind. I also thickened the base of the push rods to make them less fragile.
I used springs that I happned to have left over from a kit, they were about 9mm diameter and 36mm long.
The cover caps intentionally stay proud of the body but could be cut shorter to make them flush.