Wire Gripper for soldering
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My take on the wire gripper that is available to buy from various places
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is my version of the wire grippers you can get to hold two wire together while you solder them.
Printed in PLA at 0.3 layer height. I blocked supports everywhere except for two small supports at the ends of the internal slots, these were easy to remove with a pointed tool of some kind. I also thickened the base of the push rods to make them less fragile.
I used springs that I happned to have left over from a kit, they were about 9mm diameter and 36mm long.
The cover caps intentionally stay proud of the body but could be cut shorter to make them flush.