Centauri Carbon PTFE Pass-Through and Radius Control for Internal Runout Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When a CC is fitted with an internal spool kit this allows a PTFE to be cleanly routed in from the exterior
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 1142
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A simple solution for feeding filament residing externally into a Centauri Carbon using one version or another of my Internal 1kg Spool Mount Kit that is already populated with a spool.
The cover snaps into the wire hole for the runout sensor in the right panel. This cover allows the PTFE to pass through the panel while securing it in place. The guide may be scaled in the slicer for a larger radius. I would not recommend going smaller, however. The guide will likely need to be fastened as desired with an adhesive fastener. You will want at -least- 15 cm of 4 mm PTFE tubing on hand to use this.