Centauri Carbon PTFE Pass-Through and Radius Control for Internal Runout Sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When a CC is fitted with an internal spool kit this allows a PTFE to be cleanly routed in from the exterior
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 98
- Makes
- 1
- Views
- 1,142
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A simple solution for feeding filament residing externally into a Centauri Carbon using one version or another of my Internal 1kg Spool Mount Kit that is already populated with a spool.
The cover snaps into the wire hole for the runout sensor in the right panel. This cover allows the PTFE to pass through the panel while securing it in place. The guide may be scaled in the slicer for a larger radius. I would not recommend going smaller, however. The guide will likely need to be fastened as desired with an adhesive fastener. You will want at -least- 15 cm of 4 mm PTFE tubing on hand to use this.