BTG "Short Stack" Pint box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BTG short Pint casings. Rear 24s1p. all 11.5" tires up to 7" width will fit on STANDARD LENGTH rails. ABS MAX OD 312mm
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
These are shortened Pint casings intended for large “BTG” tires on Standard Length rails
Form-Fitted to DUAL REAR Freeride Bumpers
(B.A.N.G. bumper compatibility to be determined)
The rear casing officially supports 24s1p 21700 (built efficiently and well) as well as lower configurations comfortably.
(Battery configurations will be posted soon)
The Wheel-Well has been expanded, extending up to the edges of the footpads.
Any and all 11.5 tires should fit {up to 7" width (rail limit 7.3")}, including the Burris 7.
Symmetrical m20 cable glands mounts pulled inwards as to not impede into Wheel-Well
Tires labeled 12" are unconfirmed, but the BTG Thundercat may be possible
New screw mounts for reversed-rail box installation for funsies
Bumper trimming required depending on tire selection