1 / 18
Shimano Bottom Bracket Bearing Press by TunnelVision.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Shimano press fit bottom bracket tool" by TunnelVision on thingiverse.com. Re-upload respecting original license.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (32)Powiązane
A huge thanks to TunnelVision for the high quality design and documentation of this very useful tool. Original source description:
"Tool for removing and installing Shimano press-fit BB86/BB92 bottom bracket.
https://www.youtube.com/watch?v=2yMyXWclet4
Print Settings
- Printer brand:
Wanhao
- Printer:
Wanhao Duplicator i3 V2
- Rafts:
No
- Supports:
No
- Resolution:
0.2mm
Post-Printing
3D printed parts
For bottom bracket removal:
- 2 x collet
- 1 x cup
- 1 x expander rod
For installation:
- 2 x bushing 1
- 1 x bushing 2 (I glued bushing 2 back-to-back with 1 of the bushing 1's)
Additional parts
- ~150mm M8 threaded rod
- 2 x M8 nuts
- 2 x M8 washers. Large washers on the bushings help distribute the load
- 1 x small o-ring or rubber band to keep the two halves of the collet together - 18-21mm OD seems to work."