Pot for 13mm rods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As the space between rods of my rail isn't consistent I couldn't use models attached between two 'easily'.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
As the space between rods of my rail isn't consistent I couldn't use models attached between two ‘easily’ I designed this simple planter using:
- the planter itself
- the collar
- 2 M3 inserts
- 2 M3*16 screws
The planter is designed for 13mm rods + 0,5mm thick soft/sticky layer for adhesion/friction. I used a used latex tube.
The planter is held in place at the top with the collar and a centering bit at the bottom is here in case of bending under weight and/or warmth.
I incorporated an overflow: If there is more than 2cm of water at the bottom of the planter water will drop. For the moment water is dripping on the rail but feel free to add a collector for excess and/or connect several planters.
I printed this in a yellow petg from Poland (Amazon Basic) using a 0,6mm nozzle and 0,35mm layer, 100% infill.
I don't share the .3mf as my mini is tuned (Orbiter 2.5 + Triangle lab TD6 hotend).
As allways the freecad model is provided for easier adaption to your need.