Pot for 13mm rods
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
As the space between rods of my rail isn't consistent I couldn't use models attached between two 'easily'.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
As the space between rods of my rail isn't consistent I couldn't use models attached between two ‘easily’ I designed this simple planter using:
- the planter itself
- the collar
- 2 M3 inserts
- 2 M3*16 screws
The planter is designed for 13mm rods + 0,5mm thick soft/sticky layer for adhesion/friction. I used a used latex tube.
The planter is held in place at the top with the collar and a centering bit at the bottom is here in case of bending under weight and/or warmth.
I incorporated an overflow: If there is more than 2cm of water at the bottom of the planter water will drop. For the moment water is dripping on the rail but feel free to add a collector for excess and/or connect several planters.
I printed this in a yellow petg from Poland (Amazon Basic) using a 0,6mm nozzle and 0,35mm layer, 100% infill.
I don't share the .3mf as my mini is tuned (Orbiter 2.5 + Triangle lab TD6 hotend).
As allways the freecad model is provided for easier adaption to your need.