Buffer Wheel for 624 bearing for Core One MMU3 Community, STEP file provided
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buffer wheel for 624 bearings, with defined position of bearing and a washer to enable free spin of the wheel
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 751
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For me it's easier to resource 624 type bearings as I have them on stock. Additionally I prefer to have a more defined position of the bearing and a washer between the bearing and the door body, to enable free spin.
since M4 is used, a flat headed screw is necessary to make it fit in the buffer area. Additionally it is necessary to drill the mounting hole in the door body to 3,3-3,5 mm.
Needed (for each):
- 1x 624 bearing
- 1x M4x10 screw with flat head
- 1x M4 washer
Be sure to push in the bearing deep enough. It should be as far in as the picture shows, use the bottom chamfer as orientation, then add a standard M4 washer.
If you need to modify it for a different type of bearing or if the fitting is to tight, the step file is provided as well for modification.