Buffer Wheel for 624 bearing for Core One MMU3 Community, STEP file provided
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Buffer wheel for 624 bearings, with defined position of bearing and a washer to enable free spin of the wheel
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 72
- Makes
- 0
- Views
- 751
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For me it's easier to resource 624 type bearings as I have them on stock. Additionally I prefer to have a more defined position of the bearing and a washer between the bearing and the door body, to enable free spin.
since M4 is used, a flat headed screw is necessary to make it fit in the buffer area. Additionally it is necessary to drill the mounting hole in the door body to 3,3-3,5 mm.
Needed (for each):
- 1x 624 bearing
- 1x M4x10 screw with flat head
- 1x M4 washer
Be sure to push in the bearing deep enough. It should be as far in as the picture shows, use the bottom chamfer as orientation, then add a standard M4 washer.
If you need to modify it for a different type of bearing or if the fitting is to tight, the step file is provided as well for modification.