M10 Screw and Nut (3D Printable, ISO Metric Thread)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M10 × 1.5 metric screw and matching nut — 3D printable test model for fit, calibration, and mechanical applications.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 1579
- Wydruki
- 7
- Wyświetlenia
- 2899
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This model includes a metric M10 × 1.5 ISO thread screw and a matching M10 nut.
Both parts are designed to be 3D printed, and are useful for:
✅ Thread calibration
✅ Mechanical prototypes
✅ Educational purposes
✅ General fitting tests
Dimensions
Screw:
- Outer diameter: 10.0 mm
- Thread pitch: 1.5 mm (ISO standard)
- Thread length: ~25 mm
- Head diameter: variable — depending on design
- Total height: depends on your model (check STL)
Nut:
- Outer diameter: ~17 mm (typical, may vary by model)
- Inner diameter (thread core): 8.5 mm (for M10 × 1.5 thread)
- Height: customizable
Print Settings
- Layer height: 0.1–0.2 mm
- Infill: ≥50%
- Supports: Not required
- Recommended materials: PETG, ABS, ASA — PLA may wear out faster
- Tolerances: Ensure your printer is well-calibrated; you may scale by ±1% for optimal fit if necessary
Notes
This is a functional test model. It is not intended for high-load applications or permanent fastening.
For best results, use 0.1–0.15 mm layer height for fine thread detail.
The M10 screw and nut were modeled using the standard ISO parameters — however, as STL export and slicer tolerances vary, always check fit before using in functional assemblies.