1 / 2
Flexenstuhl a mount for a Brennenstuhl Powerstip to a leg of FlexiSpot desk
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for Brennenstuhl power strips, adapted to attach directly to your desk leg.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Features
- Mounts to left or right table leg
- Clip-in system for Brennenstuhl power strips (PSU)
- Two variants:
- 54 mm hole spacing
- Customizable hole spacing with OpenSCAD
Printing & Assembly Instructions
Print the mount in the default orientation
After printing, while the part is still warm, bend it toward the table spacer to achieve correct tension. (You can also heat it with a hairdryer/hot air gun later.)
Use 2× M6×16 screws to fix the mount to the desk leg (or adapt based on your setup)
Additional Materials
2× M6×16 mm screws (or similar bolts depending on desk thickness and mount preference)
Update:
Added bottom Clamp to avoid dangling socket(two m4 heatset inserts needed)