CMF Phone 2 Pro 1 Axis Phone Gimbal

Always wanted to get buttery smooth videos but didn't want to break the bank for a gimbal. Introducing the CMF Smartphone Gimbal made for the CMF 2 pro. Designed to be affordable to build but have decent stabilization properties this is a great accessory for your CMF 2 pro.

Printer: Make sure your 3D printer is fully calibrated and is very accurate or the part tolerances may be too tight or too loose.

Recommended Printers 

Prusa Mk4,Mini+,Core1,XL,Mk4s

I'm Not going down the list because it would be too long but Most machines will work

I am not responsible if your phone breaks while using this. This is specifically designed for the  CMF Phone 2 Pro.

Hardware:

Steel Deep Groove Ball Bearing-https://us.store.bambulab.com/products/steel-deep-groove-ball-bearings-1?id=42504746172552

BT3x8 SHCS Self Tapping Screw-https://us.store.bambulab.com/products/bt3-socket-head-cap-self-tapping-screws-shcs-new?id=42382271611016

Printer Settings;:

Brim:Yes

Supports:Yes

Infill:40%

Layers:3

Layer Height:.2

Filament: ABS,ASA,PETG Pro, Carbon fiber.

Assembly:

Step 1: Super Glue the handle and extension section(let it dry and cure for 24 hours before continuing).

Step 2: Insert the bearing into the hole (make sure it's flush with the printed part).

Step 3: Insert then into the bearing and the printed part.

Step 4:Add the Phone cradle into the pin and align and the screw.(you can superglue the part for extra strength).

Step 5:Add the CMF Logo Part (Optional)

You have now created the CMF Phone 2 Pro 1 Axis Smartphone Stabilizer.

You will have to remove the screw on the Phone before inserting into the Stabilizer. Then rescue the Screw when it is in the cradle.