Room Air Filter Top and Bottom Frames
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top and bottom parts to assemble four 10"X20"X1" filters into a free standing room air filter.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
The STL contains the top and bottom parts I used to assemble four 10"X20"X1" filters into a free standing room air filter. The filters you select must be labeled 10 inches for at least one dimension.
I selected MERV 8 but I may upgrade the filters to at least MERV 10. If you like you can cover the seams where the filters meet with strips of painter's tape.
I used a Thermaltake Pure20 200X200X30 fan. There may be other options but this one moves 129.6 CFM and is very quiet in my opinion. I used a 12v 1A power supply.
You'll need 4 40mm flathead screws and corresponding nuts and washers.
Nothing fancy, but it works.