Room Air Filter Top and Bottom Frames
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Top and bottom parts to assemble four 10"X20"X1" filters into a free standing room air filter.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 15
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
The STL contains the top and bottom parts I used to assemble four 10"X20"X1" filters into a free standing room air filter. The filters you select must be labeled 10 inches for at least one dimension.
I selected MERV 8 but I may upgrade the filters to at least MERV 10. If you like you can cover the seams where the filters meet with strips of painter's tape.
I used a Thermaltake Pure20 200X200X30 fan. There may be other options but this one moves 129.6 CFM and is very quiet in my opinion. I used a 12v 1A power supply.
You'll need 4 40mm flathead screws and corresponding nuts and washers.
Nothing fancy, but it works.