1 / 2
Berning Robot 37.5mm F/2.8 Tessar/Xenar Push-on Lens Hood — zdjęcie 1
1 / 2

Berning Robot 37.5mm F/2.8 Tessar/Xenar Push-on Lens Hood

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Push-on hood for the common standard lenses of the earlier Berning Robot models, fits both the Tessar and Xenar 37.5/2.8

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
50
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Simple push-on lens hood for the standard lenses of the Berning Robot I, II, IIa, ….: 37.5mm F/2.8 Tessar or Xenar, hood fits both lenses as they have the same inner diameter. Also allows use while a filter is mounted to the Tessar :)

Natively, the hood very slightly intrudes into the viewfinder image, if you want a shorter one, just cut off a portion in the slicer.

Prints without support with the side facing the camera up, maybe consider using a brim depending on your bed adhesion. The push-on grip is very slightly oversized for me - give each arm just one or two quick strokes with a needle file to make it a good, tight fit, and you should be able to set the aperture by rotating the hood.

Tagi